| 
Sci-Fi scenery & Accessories
A unique range of science-fiction bunkers, turrets and barriers designed for 28mm sci-fi gaming.
Coming Next:
 Medical Chamber
Auto-Doc
 Weapons Lockers
 Blast barriers
See here for explanation of bars above
Turrets
A series of high quality Urethane resin and white metal turrets designed to fit with our bunkers. Turrets come unpainted and unassembled, decals and turret mount not included.
|
Aegis 4 Point Defence System
A close-defence laser system designed to be small enough to mount on the underside of building ceilings and overhangs. The turret comprises 4 resin parts and 4 metal barrels, includes "Top-Hat" mount.
The side sponsons can be drilled and mounted on stiff wire to allow for elevation of the guns. |
|
|
|
|
|
|
|
AVSRS Communication Array
4 piece communications turret with 2 mounting spots on the rear for aerials and including "Top Hat" mounting piece. |
|
|
|
|
|
|
|
L45 CHARM Plasma Cannon
3 piece resin turret including "Top Hat" mounting piece. |
|
|
|
|
|
|
|
D40 STYX Air-Defence System
7 piece resin turret including "Top Hat" mounting piece. The side sponsons can be drilled and mounted on stiff wire to allow for elevation of the guns. |
|
|
|
|
| |
|
|
Turret Mount
Solid resin Turret Mount with dual-mount capability: the mount is capable of taking both the standard "Top-Hat" as well asa hemispherical turret connector which allows the entire turret to be elevated as well as rotated.
|
|
|
|
|
|
Security Pack:
Secuirty Pack includes 2 metal automated sentry guns and 2 resin-cast mounting plates.
Airlock:
Includes 2 single-sided detail airlock doors and 2 white metal door contorl panels.
Large Doorway / airlock / blast door
Includes 2 single-sided detail doorways, 2 white metal security cameras, 2 white metal doorway control pads and 2 white metal security guns. (includes screen detailing prints)
Click here for larger images
Command Stations
Includes white metal chair and resin command desks
Click here for larger images
Computer Screens detailing pack
A total of 20 resin-cast components to make 18 computer console displays. The pack includes a choice of two types of gloss-printed sets of screen details: Black-backed Screens and White-backed Screens. The information on the screens remains the same the only difference is the backing colour - click the link below to get a better idea of the alternatives..
Click here for larger images
The detailing screens are high quality prints on photo-quality paper pre-measured to fit the control screens. To use them first paint up your control pads and then simply cut them out the screen details using a sharp bladed hobby knife and then trim off a tiny piece from each corner. If using the Black-backed screens take a black felt pen and run this along the edge of the screen detail (this will hide the white edge of the paper). Then simply glue into place on the control pad with a small dab of Scatter-Grip or Tacky Glue. Protect the details by painting on a bit of gloss varnish and that's it!
Power Charging Points:
2 resin cast wall panels with 4 pieces of coloured acrylic rod as shown below (but unpainted!)
Communication points / Hacker Terminals
White metal cast components to make an upright communication points / Hacker Terminals which include 2 communications pads (1 to go either side of the plinths). (Includes screen detailing prints)
Click here for larger images
Set of 6 control Pads
A set of 6 metal-cast control pads ideal for mounting on walls as door control pads, power switches, weapon control pads and so forth. Standard dimensions H/W/D 20mm x 10mm x 5mm.
Screen detailing now included with every set of control Pads:
standard - 
inverted - 
The detailing screens are high quality prints on photo-quality paper pre-measured to fit the control screens. To use them first paint up your control pads and then simply cut them out the screen details using a sharp bladed hobby knife and then trim off a tiny piece from each corner. If using the Black-backed screens take a black felt pen and run this along the edge of the screen detail (this will hide the white edge of the paper). Then simply glue into place on the control pad with a small dab of Scatter-Grip or Tacky Glue. Protect the details by painting on a bit of gloss varnish and that's it!
Crates & Barrels
 A pack of resin components pressure cast to avoid air bubbles. Contians parts for 2 large crates, 4 barrels and 4 small crates.
Air Purification / Air-Con Units (out at Crusade Show - Pennarth 2007)
2 pressure-cast units that can be attached to walls or roofs as air-purification systems or air-con units.
Dimensions: 45mm (L) x 32mm (W) x 25mm (T)
Military Cryogenic Freezer
2-part pressure cast resin Cryogenic chamber. (decals and figure not included)
Military Medical Bed ( 2007)
Military Liquid ICU
Liquid Intensive Care Unit
A multi-part pressure-cast resin kit which make sup into a "liquid intensive care unit" but can be suitably adjusted to be made into a prison cell and so forth. The clear acrylic tube is included and has an internal diameter of 32mm and height of 60-70mm (varies within that range).
Kit Instructions
"Live Capable" Military Cargo Container
Highly detailed cargo container ideal as a single objective or stacked as scenery. Pressure-cast resin. Dimensions: ~78mm x 45mm x 30mm
Moonfleet Miniatures Scientists - Small range of scientist types ideal for sci-fi settings!
Figures painted by Zorz Serbia
Scientist Overseer
A growing collection of non-combat figurines ideal for guarding your sci-fi outposts, medical centers research centers and so forth. 28mm scale.
Buy all 5 Inspectors and save £2.50!
(If the deal is out of stock but we have all 5 inspectors please email us and we'll update quantities!)
 Antenociti's Workshop Barbed Wire
Approximately 30 foot (that's 30 real foot ~ 9m, not scale foot) of coiled double-stranded wire suitable for 15mm - 54mm scale barbed wire.
        
|
